Deburring refers to the procedure of eliminating burrs (burrs are tiny, sharp edges or projections) from the surface of a workpiece. These burrs arise from uneven deformation or shearing of the material during the cutting process, which impairs the part's appearance, fit, and performance. If burrs are not removed correctly, they may also lead to higher friction, accelerated wear, or even damage to the part. Whether in metalworking or other material processing fields, burrs not only hinder part assembly but also pose a risk of causing mechanical breakdowns. Consequently, deburring plays an irreplaceable and crucial role in modern manufacturing.
What Causes Burrs?
- In the cutting phase, when shear blades or saw blades become blunt, they fail to cut the material effectively, leading to the formation of burrs on the cutting edge.
- During the stamping phase, the punch undergoes wear over time, which results in an uneven edge of the punched part and the generation of burrs.
- In thermal cutting processes, improper flame cutting operations-such as inconsistent cutting speeds and excessive or inadequate flame intensity-can also cause burrs to form on the cutting edge.
- During welding, unstable welding processes or incorrect operational practices may lead to the appearance of burrs or irregular surfaces on the weld edge.
How to Avoid Burrs?
- Increase the tool rake angle;
- Decrease the cutting thickness;
- Perform appropriate heat treatment on the workpiece to minimize plastic deformation;
- Adopt a cutting fluid with excellent anti-adhesion performance;
- Adjust the cutting speed properly according to the plasticity of the part.











