Home > Blog > Content

The Maintenance Of Tracks And Bottom Maintenance Cannot Be Ignored

Jul 19, 2023

Effective maintenance and upkeep of equipment can maintain the good performance of crawler crane equipment, increase the service life of the equipment, reduce the possibility of accidents during crawler crane operations, thereby reducing work delays and achieving better economic benefits. Firstly, it is necessary to have a deep and detailed understanding of the mechanical equipment used, conduct regular and irregular inspections during daily operation, clarify the shortcomings and design defects of the equipment, conduct detailed analysis of the existing problems and defects, and determine appropriate maintenance methods. Regular and appropriate maintenance is one of the conditions for maintaining the healthy operation of crawler crane equipment.
The lifespan of track chains often depends on the degree of tension and reasonable adjustment of the track, so it is necessary to regularly check the lower deflection of the upper track. The method of inspection is to clean the track first, place a wooden wedge above the driven wheel, and then start the walking track to squeeze the wooden wedge. This way, the lower end of the track is tensioned, and the loose part on the upper part is bent down. Use a ruler to measure the deflection, and the normal deflection is usually 8-15mm.
The track tensioning device consists of an oil cylinder, a tensioning crossbeam, and a tensioning spring. The method of tensioning is to use a high-pressure oil gun to inject calcium based lubricating grease into the oil cylinder from the oil nozzle, push the piston, and then use the tensioning beam to push the driven wheel to move to achieve track tensioning. When relaxation is necessary, slowly rotate the oil filling valve counterclockwise to release it, and the lubricating grease will be discharged from the oil discharge port. Note: If the sag of the left and right tracks is different, the tracks may deviate when walking.

Send Inquiry
Contact Us
  • ATTN: Fiona (Sales Manager)
  • Email: sales01@beray-metal.com
  • Add: 9-89-11, Building 017, No.128 Huizhan Road, Yinzhou District, Ningbo City, Zhejiang Province