1. After the excavator is completed, the machinery should be driven away from the work site and parked on a safe, flat, and hard ground. The bucket should be lowered horizontally with the bottom touching the ground. The left and right travel control valves should be placed in the neutral position, and the safety locking rod should be pushed to the locking position. The doors and windows should be closed and locked.
2. Check if there is any oil or water leakage in the working equipment and chassis walking parts. If there is any abnormality, repair it immediately. Check whether there are flammable materials such as paper scraps and cloth around the engine and promptly remove them to prevent fires. Remove the soil from the lower walking mechanism.
3. Excavators can perform short distance self transfer, and tracked excavators are not allowed to move more than 5 kilometers on their own. When continuous operation is required, if the distance between the work site and the station is more than 500 meters, it is not allowed to drive the excavator back to the station after work. A dedicated person should be assigned to supervise the construction site (wheeled excavators may not be subject to this restriction, but their own distance should not be too long).
4. When the excavator is transferring itself for a short distance, the walking mechanism should be thoroughly lubricated, and the walking speed should not be too fast.
Safety precautions after excavator operation
Jul 05, 2023
You May Also Like
-
9W8452 1U3452 Replacement J Series J450 Family Bucke... -
7T3402 8E4402 J400 Cat Dig Changing Bucket Teeth -
207-70-14151TL PC300 for Komatsu Tiger Bucket Teeth ... -
8E1848 for Cat D8 D9 Ripper Shank Protector -
7D1949 for Caterpillar 8 Foot Grader Blade Cutting E... -
8K8161 Loader Bucket Bolt On Cutting Edge Base Edge
Send Inquiry
Categories
Contact Us
- ATTN: Fiona (Sales Manager)
- Email: sales01@beray-metal.com
- Add: 9-89-11, Building 017, No.128 Huizhan Road, Yinzhou District, Ningbo City, Zhejiang Province

