Komatsu PC2000 Bucket Mining Bucket Excavators

Komatsu PC2000 Bucket Mining Bucket Excavators

Machine Model: Komatsu PC2000 Bucket
Product Name: PC2000 bucket/bucket PC2000 for Komatsu
Ton Class: 200 Ton
Bucket Type: BH/FS
capacity: 13.7 m3
Delivery Time: 45days for one container(around 18-25tons)
Send Inquiry
Description

Machine Model

Komatsu PC2000 Bucket

Product Name

PC2000 bucket/bucket PC2000 for Komatsu

Ton Class

200 Ton

Bucket Type

BH/FS

capacity

13.7 m3

Color

Yellow, black, red green or as your required

Logo

Mainly OEM or No logo

Delivery Time

45days for one container(around 18-25tons)

Our Komatsu PC2000 Bucket is a high-performance bucket designed specifically for large-scale mining and open-pit mining operations, perfectly matched with Komatsu PC2000 series excavators (such as the PC2000-8 and PC2000-11).

 

Product Advantages

 

  • Large Capacity and High Efficiency: When configured with the Komatsu PC2000-11, the bucket capacity reaches 12.0–13.7 m³, significantly increasing the single-bucket load.
  • Powerful Digging Force and Boom Force: For example, the PC2000-8 bucket boasts a digging force of up to 626 kN, and its boom force is also very strong.
  • Carefully Matched Working Modes: The PC2000 series typically supports multiple working modes (such as Power and Economy modes), allowing the bucket to flexibly switch between fuel efficiency and operating speed.

 

Durability and Reliability

The bucket body is constructed using high-strength alloy steel (or wear-resistant steel plates, such as Hardox plates), greatly enhancing its wear resistance. Key components (such as the bottom plate, side plates, and tooth holders) are extra thickened or reinforced with protective plates to withstand frequent impacts and strong shocks. Compatible with Komatsu's proprietary K-prime gear system, it simplifies tooth replacement, extends tooth life, and reduces downtime for maintenance.

Productivity Improvement

Optimized hydraulic flow control and a high-efficiency circulation system enable rapid bucket loading and unloading, resulting in shorter cycle times. Component design prioritizes ease of maintenance (such as an automatic lubrication system for the shovel pins), reducing maintenance frequency and improving overall utilization. Integration with Komatsu's remote monitoring systems (such as KOMTRAX) allows for real-time monitoring of the bucket and overall machine status, helping to prevent malfunctions and optimize operational strategies.

 

Product Manufacturing Process

 

1. Machining Process

  • Forging/Casting: Bucket structural components (such as the shovel lip and tooth holders) can be produced through forging or investment casting (lost-wax casting/sand casting) to ensure inherent mechanical strength and toughness.
  • Sheet Metal Welding: The main body uses high-strength steel plates (such as Q345B + NM400 or Hardox plates), employing a combination of automated welding and manual repair to ensure the rigidity of the overall structure and the quality of welds.
  • Machining: Key interfaces (such as pin holes and connecting pin sleeves) undergo precision milling and turning, followed by line-boring treatment to ensure connection accuracy and durability.

2. Surface Treatment

  • Heat Treatment: To improve wear resistance and impact resistance, some bucket components (such as guard plates and tooth holders) are typically hardened or surface-strengthened, achieving a hardness of approximately 48–52 HRC.
  • Sandblasting + Painting: The exterior of the bucket is sandblasted to remove stress and oxide layers, then coated with high-strength anti-corrosion paint (usually mining yellow or a customer-customized color) to extend its service life.
  • Rust Prevention: Zinc plating or coatings are applied to manifolds, riveted areas, or oil reservoirs to prevent corrosion, especially in humid or dusty mining environments.

Hot Tags: komatsu pc2000 bucket mining bucket excavators, China komatsu pc2000 bucket mining bucket excavators manufacturers, suppliers, factory, 154-8976, Bucket 320D for CAT, 356-4397, bucket 302 8995, bucket 329D, 353-1792

Send Inquiry
Contact Us
  • ATTN: Fiona (Sales Manager)
  • Email: sales01@beray-metal.com
  • Add: 9-89-11, Building 017, No.128 Huizhan Road, Yinzhou District, Ningbo City, Zhejiang Province

(0/10)

clearall